The technique for extending an extension, trad or waterpole will vary depending on the brand and style of pole you are using. Always be sure yo know about the tools you are using. Here are some general steps that can be applied to different types of poles:
- Be familiar with the style of locking collar or mechanism before you start: Look for the locking mechanism on the pole, which is usually located near the top of each section. The locking mechanism may be a twist lock, a snap button, a clamp or a similar mechanism depending on the type of pole.
- Set your product on the end of the pole for use: Most window cleaning tools are simply a “friction fit” style. This means the products will simply slide on to the tip of the pole. If you are using a branded pole like Ettore, Unger, or Moerman for example, the tip might offer a lock in feature with products from the same brand. Become familiar with how the product fits while it is still within eye sight!
- Look around for your “drop zone”: Be sure to consider your surroundings when extending a pole. If, for example, you extend an 18 ft pole, if it were to fall while fully extended, the impact could be as far as 18 ft from where you are standing. That might be further than you think! Be aware of your surroundings and make a plan.
- Loosen the locking mechanism: Loosen the locking mechanism by twisting, pressing or releasing it depending on its design. This will allow you to slide and extend the sections of the pole.
- Extend the pole: Hold the pole firmly and extend it to the desired length. If the pole has multiple sections, extend one section at a time. Be sure to follow the manufacturer’s instructions for the maximum number of sections you can extend at one time, as extending too many sections at once can make the pole unstable.
- Lock the pole: Once the pole section is extended to the desired length, lock the sections in place by tightening the locking mechanism. Be sure to secure it tightly to prevent the sections from sliding or collapsing.
- Test the pole: Give the pole a gentle shake to make sure it’s secure and stable. If the pole wobbles or feels unstable, retract it to the previous section and adjust the locking mechanism or your grip on the pole.
- Complete the task: Once the pole is fully extended and locked in place, you can use it for its intended purpose.
- Contract the pole when finished: Reverse the steps used when extending the pole to slide sections and contract the telescoped pole. Start with the sections you can reach. Quick note – Be sure to keep your hand and any loose clothing or equipment away from the collapsing sections. It is very easy to pinch fingers, skin, clothing or anything else on accident. A pinch of the skin can lead to a nasty blood blister.
It’s important to follow the manufacturer’s instructions for extending your specific type of pole to ensure that you extend it safely and effectively. Select a pole that is the appropriate length for your application! There is little point in using a 24 ft pole to reach a 10 ft window. There are many options of pole lengths available. Check out the available options at Detroit Sponge today.